Impact of adhesive ingredients on adhesion between rubber and brass-plated steel wire in tire

Proficiency on underlying mechanism of rubber-metal adhesion has been increased significantly in the last few decades. Researchers have investigated the effect of various ingredients, such as hexamethoxymethyl melamine, resorcinol, cobalt stearate, and silica, on rubber-metal interface. The role of each ingredient on rubber-metal interfacial adhesion is still a subject of scrutiny. In this article, a typical belt skim compound of truck radial tire is selected and the effect of each adhesive ingredient on adhesion strength is explored. Out of these ingredients, the effect of cobalt stearate is found noteworthy. It has improved adhesion strength by 12% (without aging) and by 11% (humid-aged), respectively, over control compound. For detailed understanding of the effect of cobalt stearate on adhesion, scanning electron microscopy and energy dispersive spectroscopy are utilized to ascertain the rubber coverage and distribution of elements. X-ray photoelectron spectroscopy results helped us to understand the impact of Cu_XS layer depth on rubber-metal adhesion. The depth profile of the Cu_XS layer was found to be one of the dominant factors of rubber-metal adhesion retention. Thus, this study has made an attempt to find the impact of different adhesive ingredients on the formation of Cu_XS layer depth at rubber-metal interface and establish a correlation with adhesion strength simultaneously.     

Attribute Allocation and Retrieval Scheme for Large-Scale Sensor Networks

Wireless sensor network is an emerging technology that enables remote monitoring of large geographical regions. In this paper, we address the problem of distributing attributes over such a large-scale sensor network so that the cost of data retrieval is minimized. The proposed scheme is a data-centric storage scheme where the attributes are distributed over the network depending on the correlations between them. The problem addressed here is similar to the Allocation Problem of distributed databases. In this paper, we have defined the Allocation Problem in the context of sensor networks and have proposed a scheme for finding a good distribution of attributes to the sensor network. We also propose an architecture for query processing given such a distribution of attributes. We analytically determine the conditions under which the proposed architecture is beneficial and present simulation results to demonstrate the same. To the best of our knowledge, this is the first attempt to determine an allocation of attributes over a sensor network based on the correlations between attributes.     

GaN and AlGaN high-voltage rectifiers grown by metal-organic chemical-vapor deposition

In this paper, we report the study of the electrical characteristics of GaN and AlGaN vertical p-i-n junctions and Schottky rectifiers grown on both sapphire and SiC substrates by metal-organic chemical-vapor deposition. For GaN p-i-n rectifiers grown on SiC with a relatively thin “i” region of 2 μm, a breakdown voltage over 400 V, and forward voltage as low as 4.5 V at 100 A/cm² are exhibited for a 60-μm-diameter device. A GaN Schottky diode with a 2-μm-thick undoped layer exhibits a blocking voltage in excess of ∼230 V at a reverse-leakage current density below 1 mA/cm², and a forward-voltage drop of 3.5 V at a current density of 100 A/cm². It has been found that with the same device structure and process approach, the leakage current of a device grown on a SiC substrate is much lower than a device grown on a sapphire substrate. The use of Mg ion implantation for p-guard rings as planar-edge terminations in mesageometry GaN Schottky rectifiers has also been studied.     

Delta-doped AlGaN/AlN/GaN microwave HFETs grown by metalorganicchemical vapour deposition

The performance of an innovative delta-doped AlGaN/AlN/GaN heterojunction field-effect transistor (HFET) structure is reported. The epitaxial heterostructures were grown on semi-insulating SiC substrates by low-pressure metalorganic chemical vapour deposition. These structures exhibit a maximum carrier mobility of 1058 cm²/V s and a sheet carrier density of 2.35×10¹³ cm^-2 at room temperature, corresponding to a large n_s μ_n product of 2.49×10¹⁶ V s. HFET devices with 0.25 μm gate length were fabricated and exhibited a maximum current density as high as 1.5 A/mm (at V_G=+1 V) and a peak transconductance of g_m=240 mS/mm. High-frequency device measurements yielded a cutoff frequency of f_t≃50 GHz and maximum oscillation frequency f_max≃130 GHz     

Biological and health implications of toxic heavy metal and essential trace element interactions

Human civilization and a concomitant increase in industrial activity has gradually redistributed many toxic metals from the earth's crust to the environment and increased the possibility of human exposure. Among the various toxic elements, heavy metals cadmium, lead, and mercury are specially prevalent in nature due to their high industrial use. These metals serve no biological function and their presence in tissues reflects contact of the organism with its environment. They are cumulative poison, and are toxic even at low dose. Studies of metabolism and toxicity of these elements have revealed important interactions between them and some essential dietary elements like calcium, zinc, iron, selenium, copper, chromium, and manganese. In general, a deficiency of these essential elements increases toxicity of heavy metals, whereas an excess appears to be protective. While most of the observations are on laboratory animals, limited human data are in agreement with the results of animal experiments. These suggest that the dietary presence of the essential elements may contribute to the protection of man and animal from the effects of heavy metal exposure, while their deficiency may increase toxicity. Appropriate dietary manipulation thus may be valuable in the prevention and treatment of heavy metal toxicity.     

High-pressure dc sputtering of High-Tc BPSCCO thin films withTc(0) above 100 K

High-T _c Bi(Pb)-Sr-Ca-Cu-O thin films have been made on single-crystal MgO substrates using high-pressure dc sputtering technique. X-ray studies confirm the crystallinity and highly oriented structure withc-axis perpendicular to the substrate. By optimizing the annealing schedule the formation of the high-T _c phase is stabilized. The best film exhibited superconducting transition temperature with zero-resistance temperature,T _c(0), as high as 101 K. Temperature dependence ofJ _c indicates the presence of Josephson-type weak links.     

X gene and precore region mutations in the hepatitis B virus genome in persons positive for antibody to hepatitis B e antigen: comparison between asymptomatic "healthy" carriers and patients with severe chronic active hepatitis

Hepatitis B virus (HBV) carriers with antibody to hepatitis e antigen comprise asymptomatic carriers (ASCs), who have low replication levels of HBV, and patients with chronic active hepatitis (CAH), who have high levels of viral replication. To investigate whether defects in the X protein might be responsible for this difference in the level of viral replication, nucleotide sequences of X and precore gene regions in serum HBV were analyzed in 19 ASCs and 9 CAH patients. All patients had a point mutation creating a stop codon in the precore region. Seventeen ASCs (87.3%) had identical mutations consisting of 4 noncontiguous 1-bp deletions or an 8-bp deletion, both of which truncate the normal X protein, whereas no CAH patient had an X gene mutation (P < .001). Thus, deletion of the X protein might be responsible for the low levels of viral replication in ASCs.     

Neuropathology of bovine herpesvirus type 5 (BHV-5) meningo-encephalitis in a rabbit seizure model

CI-994 (acetyldinaline) is an orally active anticancer drug currently in Phase 1 clinical trials. To assess its preclinical toxicity, CI-994 was administered orally as suspensions to Wistar rats (10/sex/dose) and in capsules to beagle dogs (3/sex/dose) once daily for two weeks. Doses were 1.5, 5, and 15 mg/kg for rats (9, 30, and 90 mg/m2, respectively), and 0.5, 2, and 5 mg/kg for dogs (10, 40, and 100 mg/m2, respectively). Systemic exposure was dose-proportional based on toxicokinetic analysis in dogs. Severe clinical signs and mortality occurred at the highest dose in both species beginning on Day 10. Neutropenia, lymphocytopenia, thrombocytopenia, lymphoid depletion, bone marrow hypocellularity, and testicular degeneration were observed in both species, primarily at the mid- and high-doses. Despite continued treatment, neutrophil counts in dogs returned to control levels in Week 2. Other microscopic findings in rats included splenic hematopoietic depletion at all doses and epithelial cell necrosis in various tissues at 15 mg/kg. Additional bone marrow changes in dogs involved myeloid and megakaryocyte hyperplasia at 2 mg/kg and abnormal myeloid and megakaryocyte maturation at 2 and 5 mg/kg. Except for the testicular effects in both species, all changes were reversible within a 4-week (rat) or 9-week (dog) recovery period. The results of these studies show that target organ effects of CI-994 principally involve tissues with rapidly dividing cell populations and that bone marrow suppression is the dose-limiting toxicity. CI-994 also seems to interfere with the release and/or maturation of cells in the bone marrow.     

Risk-Based Allocation of Distribution System Maintenance Resources

Asset management is an important activity in present day distribution system planning and operation. Utilities are constantly striving to optimize the use of resources available for maintenance while ensuring system reliability is within satisfactory limits. This paper proposes a method to allocate maintenance resources to various distribution system assets. To determine the effects of maintenance, a predictive reliability assessment tool is developed. This paper describes the model on which this tool is based. The results obtained from reliability assessment can be used along with an optimizer to allocate resources to various maintenance tasks in a distribution system.